Standard | Number | Description |
|---|---|---|
Control of External Corrosion of Underground or Submerged Metallic Piping System | SP0169-2013 | CP guidance for submerged metals |
Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems | TM0497-2018-SG | This standard test method provides descriptions of the measurement techniques and cautionary measures most commonly used on underground and submerged piping other than offshore piping to determine whether a specific criterion has been met at a test site. This standard contains instrumentation and general measurement guidelines. It includes methods for voltage drop considerations when structure-to-electrolyte potential measurements are made and provides guidance to minimize incorrect data from being collected and used. |
NACE/SSPC Joint Surface Preparation Standards Package (NACE No 1, 2, 3, 4, 51300-00615, 6, 8) | NACE/SSPC Joint Surface Preparation Standards Package (NACE No 1, 2, 3, 4, 51300-00615, 6, 8) Surface finishing levels: White Metal, Near-White Metal, Commecial, Industrial, Brush-Off and also standards for concrete surfacing and conference paper for waterjetting. | |
Electrical Isolation of Cathodically Protected Pipelines | SP0286-2007-SG | Requirement to ensure adequate isolation of cathodically protected pipelines, especially those with high dielectric coatings. |
Corrosion Control of Underground Storage Tank Systems by Cathodic Protection | SP0285 – 2011 | Recommendations for controlling external corrosion on underground storage tank systems by cathodic protection. Bare/coated mild steel tanks. Metallic piping & connectors/components. |
Performing Close-Interval Potential Surveys and DC Surface Potential Gradient Surveys on Buried or Submerged Metallic Pipelines | SP0207-2007 | Presents procedures for performing close-interval DC pipe-to-electrolyte potential surveys on buried or submerged metallic pipelines. |
Impressed Current Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks | SP0388-HD2014-SG | Impressed current cathodic protection to the normally submerged steel surfaces inside water storage tanks. Design and installation of cathodic protection systems and methods for determining their effectiveness. |
High-Voltage Electrical Inspection of Pipeline Coatings | SP0274-2011-SG | High-voltage electrical inspection of pipeline coatings. Testing voltages, grounding, exploring electrodes, speed of travel, voltage measurements, surface condition, and care of equipment. |
Design, Installation, Operation, and Maintenance of Impressed Current Deep Anode Beds | SP0572-2007-SG | Design, installation, operation, and maintenance of deep groundbeds for control of external corrosion of underground or submerged metallic structures by impressed current cathodic protection. |
Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks | SP0196-2020 | Galvanic anode cathodic protection (CP) for submerged steel surfaces in water supply and fire protection storage tanks. Design and installation of CP systems. Effectiveness evaluation, operation, maintenance. |
External Cathodic Protection of On-Grade Carbon Steel Storage Tank Bottoms | SP0193-2016-SG | Application of CP to control external corrosion of carbon steel on-grade storage tank bottoms that are in contact with an electrolyte. Both galvanic anode CP systems and impressed current CP systems. |
Impressed Current Cathodic Protection of Internal Submerged Surfaces of Carbon Steel Water Storage Tanks | SP0388-2018 | Impressed current cathodic protection to the normally submerged steel surfaces inside water storage tanks. Design and installation of cathodic protection systems and methods for determining their effectiveness. |
Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems | SP0177-2014 | Design, construction, operation, and maintenance of metallic structures and corrosion control systems used to mitigate the effect of lightning and overhead alternating current (AC) power transmission systems. |
The Use of Coupons for Cathodic Protection Monitoring Applications | SP0104-2014 | The use of coupons for cathodic protection monitoring applications |
Measurement Techniques Related to Criteria for Cathodic Protection of Underground Storage Tank Systems | TM0101-2012-SG | Measurement techniques and precautions commonly on underground tanks to determine if compliance with a specific criterion has been achieved. |
Application of Tape Coatings for External Corrosion Protection of Buried Metal Pipelines | SP0109-2019 | This Standard Practice provides the most current technology and industry practices for material requirements and the use of tape coatings for external mainline coating, coating repair, coating rehabilitation, and coating weld joints on buried metal pipelines. |
Application of Cathodic Protection for External Surfaces of Steel Well Casings | SP0186-2007-SG | Procedures to determine the need for cathodic protection. Current requirements for well casings in oil and gas production and gas storage. Design and installation of cathodic protection systems. |
Field Measurement of Surface Profile of Abrasive Blast-Cleaned Steel Surfaces Using a Replica Tape | SP0287-2016-SG | One procedure for measuring the surface profile of abrasive blast cleaned steel. The measurement technique uses a tape that replicates the surface profile. |